Terminator Muzzle Brakes

T1

T1 Terminator muzzle brakes are designed for .223 to 300 Winchester Magnums on barrels up to 17mm diameter
The T1 Dimensions are, 17.2mm, 0.677” diameter,  50mm, 1.96” long, 35-40 grams, 1.23-1.41 ozs|
The T1 standard threads are,7/16 x 28 for Kimber.
M13 x 0.75 & M13 x 1.25 for Browning
½ x 28 for custom applications

The standard through hole is for a .224 & requires opening up to 0.025-0.030″ over caliber size if used on larger calibers up to a maximum of 30 cal.
The T1 doesn’t have a top or bottom, has flats for a 15mm spanner so they can be easily fitted by the Gunsmith. Ports are 90 degrees to the ground to reduce disturbance. The ports are angled back away from the shooter to minimize shooter discomfort and maximize performance.

T2

T2 Terminator muzzle brakes are designed for .223 to 300 Magnums on barrels up to 21mm diameter
The T2 Dimensions are, 21mm, 0.82” diameter, 64mm, 2.36” long, 65-75 grams, 2.29-2.65 oz
The T2 standard threads are, ½ x 20, 28 & 32, 9/16 x 24, 28 & 32, 5/8 x 24 & 28, 11/16 x 24, M14, 15, 16 & 17 x 1
The standard through hole is for a .224 & requires opening up to 0.025-0.030″ over caliber size if used on larger calibers.

The T2 doesn’t have a top or bottom, has flats for a 19mm, ¾” spanner and a small indexing mark so they can be easily fitted by the Gunsmith. Ports are 90 degrees to the ground to reduce disturbance. The ports are angled back away from the shooter to minimize shooter discomfort and maximize performance.

T3

T3 Terminator muzzle brakes are designed for .223 to 338 Magnums on barrels up to 25mm diameter.
The standard T3 threads are ½ x 28, 9/16 x 24 & 28, 5/8 x 24, 28 & 32, M15, 16, 17, 18 x 1, 11/16 x 24, ¾ x 24 & 28
The T3 doesn’t have a top or bottom, it has flats for a 23mm, 15/16 spanner and a small indexing mark so they can be easily fitted by the Gunsmith.
Ports are 90 degrees to the ground to reduce disturbance. The ports are angled back away from the shooter to minimize shooter discomfort and maximize performance.

The standard through holes are for .264 & .308
It requires opening up to 0.025-0.030″ over caliber size when fitted to larger calibers.
It is recommended the rear of the brake be tapered down to the muzzle diameter.

The T3 is 25mm, 0.984” diameter, 69mm, 2.72” long & weighs 90-115 grams, 3.17-4.05 oz depending on thread.

It is recommended the rear of the brake be tapered down to the muzzle diameter when fitting.